Home > Nickel Alloy > Nickel Alloy 200 Coils
Nickel Alloy 200 Coils stand as a summit within the domain of adaptable materials, valued for their outstanding resistance to corrosion, high-temperature endurance, and impressive mechanical strength. tailor-made predominantly from nickel, incorporating deliberate alloying components such as copper, these coils are celebrated for their reliability across a wide array of corrosive conditions, ranging from acidic surroundings to caustic solutions and even salt-rich atmospheres. Featuring a composition designed to withstand and thrive, Nickel Alloy 200 Coils act as a foundation across industries covering chemical processing, aerospace endeavors, oil and gas exploration, maritime activities, and more, where steadfast dependability and peak performance are essential.
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Nickel 200 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Nickel 200 | 0.15 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
At Koasteel, we take pride in being the largest supplier and manufacturer in the New Zealand, delivering innovative solutions for all your piping requirements. With cutting-edge production facilities strategically situated in the New Zealand, we maintain an extensive inventory of more than 25,000 tons of top-quality materials kept ready in stock.
Reach out to us for a fast quote tailored to your requirement.
We provide these Nickel Alloy 200 Coils in accordance with DIN, ISO, JIS or ANSI Standard.
Corrosion resistance: Nickel alloy 200 is fully resistant to corrosion, which makes it well suited for uses that involve contact with severe environments or corrosive substances. This resistance covers both acidic and alkaline settings.
High Temperature Performance: Nickel alloys keep their mechanical properties at temperatures over 200, which makes them perfect for standard high-temperature uses, such as in aerospace or medicine offices in the field
Electrical conductivity: Nickel alloy 200 shows outstanding electrical conductivity, which makes it fitting for electrical and electronic uses, such as heating elements, electrical resistors and electrical contractors.
Thermal Conductivity: Nickel alloy 200 offers high thermal conductivity, which makes it valuable where heat transfer matters, such as in heat exchangers and cooling systems.
Low Magnetic Permeability: Nickel alloy has a low magnetic permeability of 200, which makes it fitting for uses where reducing magnetic interference is important, such as in electrical and electronic devices.
Easy to manufacture: Nickel alloy 200 can be readily produced through conventional manufacturing methods such as machining, welding and fabrication, where shapes and sizes are adjusted to satisfy specific application needs
Reliability and Consistency: Thanks to its superior mechanical properties and corrosion resistance, Nickel Alloy 200 coils deliver reliability and durability while lowering maintenance needs and lifetime costs.
Nickel Alloy 200 Coils have applications as varied as the industries they cater to, led chiefly by the aerospace, railway, construction and automotive industries along with petrochemical, nuclear, medical, Oil & Gas, Chemical, Pharmaceutical, Food & Beverage, Nuclear, Thermal Power plants, Paper and Pulp, marine and mining, etc.
Chemical applications:Nickel alloy 200 coils withstand a wide range of chemicals, which makes them well suited for pumps, valves, heat exchangers and other chemical equipment
Electronics:They are employed in electronic parts that demand resistance to high temperatures and corrosion, including electrical connectors and copper poles
Aerospace and Safety:Nickel alloy 200 coils serve aerospace and military uses where high strength, corrosion resistance and reliability matter, such as in aerospace and missile systems
Marine Applications:Because they hold up against seawater, these coils are applied in marine equipment like shipbuilding, marine platforms and desalination plants
Food processors:Nickel alloy 200 coils are applied in food processing equipment where corrosion resistance is needed to uphold hygiene standards.
Heat Exchanger:Owing to its resistance to high temperatures and corrosion, it is applied in power generation, chemical processing, and HVSC applications.
Oil and Gas Industry:Nickel is utilized in the nickel gas industry for uses like piping, tubing and fittings that must resist hot weather and high temperatures
Medical Devices:Within the medical field, nickel alloy 200 coils are used in surgical instruments, medical implants and dental devices thanks to their biocompatibility and resistance to body fluids
Application Requirements: Indicate the particular application for which the coils are required. Nickel alloys are recognized for their outstanding resistance to corrosion across a range of environments, including 200 acids and bases. Be sure the coils you select are suitable for your intended purpose, whether that is chemical processing, electronics, or the marine environment.
Temperature and Pressure Conditions: Take into account the temperature and pressure conditions the coils will face. Nickel Alloy 200 offers excellent mechanical stability at both high and low temperatures, which makes it fit for a wide range of operating conditions. Nevertheless, confirm that the coils can handle the heat and pressure levels of your application without sacrificing performance.
Size and Dimensions: Indicate the size and dimensions of the coils required for your application. Nickel Alloy 200 coils come in a range of sizes and thicknesses to satisfy various requirements. Make certain the coils you select work with your device and can be plugged in easily without modification.
Quality and certification: Verify the quality and certification of the coils to confirm they satisfy industry standards and specifications. Seek out coils produced by trustworthy manufacturers that comply with the relevant quality standards, such as ASTM, ASME, or ISO. In addition, think about whether particular testing or certification programs exist to guarantee the coils are dependable and functional.
Cost Considerations: Weigh the prices of the different nickel alloy 200 coils available on the market. Although cost matters, it should not be the only factor in your decision. To make the most cost-effective choice over the long term, take into account the complete value proposition, including the coils’ quality, performance, and durability.
Email: sales@koasteel.nz
