Home >Nickel Alloy> Nickel Alloy Sheets and Plates
Nickel alloy Sheets and Platesare flat, thin sheets of material produced from nickel-based alloys. These alloys generally have a high nickel content, together with additional elements like chromium, molybdenum, cobalt, and iron, among others, to improve particular characteristics such as resistance to corrosion, strength at high temperatures, and toughness.
| Nickel Alloy Sheets & Plates Specifications | ASTM B162 / ASME SB162, BS EN 10088-2, en 10028-7, IS 6911 |
|---|---|
| Nickel Alloy Sheets & Plates Dimension Standard | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
| Nickel Alloy Sheets & Plates Size Range | Cold rolled ASME SB162 Grade 201 Nickel Alloy Sheet 0.5-6.4 mm Hot rolled ASME SB162 Grade 200 Nickel Alloy Sheet 3.0–10.0 mm |
| Nickel Alloy Sheets & Plates Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Nickel Alloy Sheets & Plates Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Nickel Alloy Sheets & Plates Thickness | 0.3 mm to 120 mm |
| International Standard of Nickel Alloy Sheets & Plates | ASTM A480 ASTM A959 ASME IID EN ISO 9445 EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 |
| Tolerances (width / thickness) of Nickel Alloy Sheets & Plates | EN 10258/ DIN 59381) EN 10151 ASME SB162 200 Nickel Alloy Strips EN 10088 SA -240-400 Strips |
| Finish of Nickel Alloy Sheets & Plates | 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| Hardness | Half Hard, Soft, Hard, Quarter Hard, Spring Hard |
| Form | Sheet, Plate, Strip, Flats, Clad Plate, Coils, Foils, Plain Sheet, Flat Shim, Flat Sheet, Shim Sheet, Rolling Sheet, Rolling Plate, Rolls, Blank (Circle), soft annealed, descaled, tread plate, sheared, annealed, Checker Plate |
| Value Added Service | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
| Dealers & Distributor of | SAIL, ESSAR, JINDAL, TATA, BHUSHAN, INDIAN, POSCO, JISCO, TISCO, LISCO, BAOSTEEL IMPORTED material |
| Nickel Alloy Profiling | Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting |
| Element | Ni+Co | Cu | Si | Mn | C | Mg | S | P | Fe |
|---|---|---|---|---|---|---|---|---|---|
| Nickel | 99.99 | 0.015 | 0.03 | 0.002 | 0.01 | 0.01 | 0.001 | 0.001 | 0.04 |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Nickel | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
At Koasteel, we take pride in being the largest supplier and manufacturer in the New Zealand, delivering advanced solutions for every one of your piping requirements. With cutting-edge production facilities strategically situated in the New Zealand, we maintain an extensive inventory of more than 25,000 tons of top-quality materials ready and available in stock.
Reach out to us for a fast quote tailored to your requirement.
These Nickel Alloy Sheets and Plates are supplied by us in accordance with DIN, ISO, JIS or ANSI Standard.
Corrosion Resistance:Nickel alloys offer outstanding corrosion resistance, which makes them well-suited for demanding settings like chemical processing plants, marine applications, and offshore oil and gas platforms.
High Temperature Strength:Nickel alloys retain their mechanical properties even at high temperatures, making them perfect for use in high-temperature settings such as gas turbines, power generation, and aerospace.
Excellent Mechanical Properties:Nickel alloy Sheets and Plates display superb mechanical properties, such as high tensile strength, toughness, and ductility, delivering dependable performance in challenging applications.
Versatility:Nickel alloys can be customized to satisfy particular application needs by modifying the composition of alloying elements, enabling a broad spectrum of properties and performance characteristics.
Resistance to Creep and Fatigue:Nickel alloys show resistance to creep and fatigue, enabling them to preserve their structural integrity and dimensional stability throughout extended periods of use.
Weldability and Fabricability:Nickel alloy Sheets and Plates are typically weldable and formable, permitting easy fabrication and assembly into intricate shapes and structures.
Compatibility:Nickel alloys work well with a broad array of other materials, such as metals, polymers, and ceramics, easing integration into multi-material systems and assemblies.
Longevity:Nickel alloy Sheets and Plates provide long-term durability and reliability, leading to a longer service life and lower maintenance needs for industrial equipment and components.
Nickel alloy Sheets and Plates are extensively utilized in industry across numerous sectors thanks to their remarkable characteristics. Within aerospace, these sheets are employed in parts exposed to elevated temperatures and corrosive settings, such as turbine blades and engine components. Chemical processing depends on their corrosion resistance for vessels, piping, and reactors that manage corrosive materials. In the oil and gas industry, they play an essential role in offshore platforms, pipelines, and equipment owing to their resilience against severe environmental conditions
Aerospace:Nickel alloy Sheets and Plates serve aerospace applications in the production of aircraft parts including turbine blades, engine components, structural members, and exhaust systems, owing to their strength at elevated temperatures, resistance to corrosion, and low weight.
Chemical Processing:Within chemical processing industries, these Sheets and Plates are used to build vessels, reactors, heat exchangers, and piping systems that manage aggressive chemicals and elevated temperatures, where their resistance to corrosion is vital.
Oil and Gas:In the oil and gas sector, nickel alloy Sheets and Plates are applied to offshore platforms, pipelines, valves, and equipment subjected to corrosive surroundings, high pressures, and extreme temperatures, providing dependability and durability under severe conditions.
Power Generation:Nickel alloy Sheets and Plates are employed in power generation facilities for turbines, boilers, heat exchangers, and additional parts exposed to high temperatures, pressures, and corrosive gases, securing efficiency and dependability throughout power generation operations.
Marine Engineering:These Sheets and Plates are applied in marine engineering for shipbuilding, seawater desalination facilities, offshore platforms, and marine structures, where their resistance to corrosion from seawater and demanding marine surroundings is critical.
Medical Equipment:Nickel alloy Sheets and Plates are used in the manufacture of medical equipment for parts that demand biocompatibility, corrosion resistance, and the ability to be sterilized, such as surgical instruments, prosthetic devices, and implants.
Electronics:In electronics manufacturing, nickel alloy Sheets and Plates are used for battery components, connectors, and electronic packaging thanks to their electrical conductivity, thermal stability, and resistance to corrosion.
Automotive Industry:Nickel alloy Sheets and Plates are applied in the automotive industry to produce exhaust systems, catalytic converters, fuel cells, and other parts that call for strength at high temperatures, corrosion resistance, and durability.
Nuclear Industry:These Sheets and Plates are used in the nuclear industry to build reactor components, fuel rods, and containment vessels because of their resistance to radiation, high temperatures, and corrosive surroundings.
Food Processing:Nickel alloy Sheets and Plates are used in food processing equipment for their corrosion resistance and sanitary qualities, safeguarding the integrity and safety of food processing operations.
Identify Application Requirements:Assess the working environment, taking into account temperature, pressure, corrosion, and mechanical stress levels, in order to choose Sheets and Plates capable of enduring these conditions.
Alloy Composition:Nickel alloys are available in a range of compositions, with each providing particular properties. Pick an alloy composition according to the traits you want, such as corrosion resistance, strength at high temperatures, or magnetic properties.
Thickness and Size:Pick Sheets and Plates with a suitable thickness and size to fit your application needs, taking into account factors like load-bearing capacity, dimensional tolerances, and available space.
Surface Finish:Take into account the surface finish needed for your application, whether smooth, polished, or textured surfaces. The surface finish can influence factors such as corrosion resistance, aesthetics, and ease of cleaning.
Certifications and Standards:Make certain that the Sheets and Plates comply with applicable industry standards and certifications, such as ASTM, ASME, or AMS specifications, to ensure quality, performance, and compatibility with other components.
Corrosion Resistance:Examine the corrosion resistance of the nickel alloy in relation to the particular corrosive agents found in your application, such as acids, alkalis, seawater, or chemical vapors, to avoid corrosion-related failures.
Temperature Resistance:Confirm the temperature resistance of the nickel alloy Sheets and Plates to make sure they can endure the maximum operating temperature without degradation or loss of mechanical properties.
Mechanical Properties:Take into account the mechanical properties of the nickel alloy, such as tensile strength, yield strength, and ductility, to make sure they satisfy the mechanical requirements of your application.
Fabrication and Weldability:Evaluate the fabricability and weldability of the nickel alloy Sheets and Plates to make sure they can be readily formed, machined, and welded into the desired shapes and structures without sacrificing performance.
Cost Considerations:Assess the cost of the nickel alloy Sheets and Plates, including material cost, fabrication, and installation costs, to gauge the overall value and cost-effectiveness of the solution.
Yes, nickel alloy Sheets and Plates can be well-suited for hygienic and sanitary applications thanks to their corrosion resistance, smooth surface finish that makes cleaning easy, non-toxicity, resistance to bacterial growth, high temperature tolerance for sterilization, lasting durability, and adherence to industry standards.
Nickel alloy sheets/plates can be shaped and machined using traditional techniques including cutting, bending, forming, welding, and machining. For machining tasks, carbide tooling is advised, and appropriate measures should be taken to prevent work hardening and tool wear.
Nickel alloy sheets and plates are commonly available in grades such as Inconel, Monel, Hastelloy, Alloy 20, Nickel 200, Nickel 201, and more, with each providing distinct properties and performance traits suited to various applications.
To ensure quality and reliability, it’s important to obtain nickel alloy sheets/plates from trustworthy manufacturers who follow rigorous quality control standards, certifications, and industry specifications. Material testing, inspections, and conformity with standards should be confirmed before use.
| Thickness | Width | Length | Surface Finish |
|---|---|---|---|
| 15~85 mm | 914, 1219, 1524 mm | 3048, 6069 mm 10 M | Black |
| 3~8 mm | 20~1524 mm | Container Loading: Max. 10M Bulk: as request | No.1 |
| 8 up ~ 60 mm | 30~1524 mm | Max. 6096 mm | No.1 |
Mail: sales@koasteel.nz
