Standards :ASTM B209 / ASME SB209
Temper :O,H12,H14,H16,H18,H19,H22,H24,H26,H28,H32,H34,H36,H38,H111,H112,H114,H 116,H321
Thickness : 0.2-250
Width : 100-2600
Length : 500-10000
Surface :Bright, polished, hair line, brush, sand blast, embossed, etching, and more.
Finish :Mill, finish per customer specification
Aluminum Sheet/ Plate Coating :PVC Coated, Color Coated, Polyester, Fluorocarbon, polyurethane along with epoxy coating
Type :Hot-Rolled (HR) / Cold-Rolled (CR) Sheet
| Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Al |
| 0.50 | 0.50 | 3.8/4.9 | 0.30/0.9 | 1.2/1.8 | 0.10 | 0.25 | 0.15 | Balance |
| Hardness, Brinell | Poisson’s Ratio | Melting Point | Electrical Resistivity | Modulus of Elasticity | Specific Heat |
| 47 | 0.33 | 607 – 649 °C | 4.99e-006 ohm-cm | 70.3 GPa | 0.88 J/g-°C |
At Koasteel, we take pride in being the largest supplier and manufacturer in the New Zealand, delivering advanced solutions for all your piping requirements. With cutting-edge production facilities strategically situated in the New Zealand, we maintain an extensive inventory of more than 25,000 tons of top-quality materials kept ready in stock.
Reach out to us for a fast quote tailored to your requirement.
We supply these Aluminium 5052 Sheets and Plates conforming to DIN, ISO, JIS or ANSI Standard.
Corrosion Resistance: Aluminum 5052 provides outstanding corrosion resistance in marine and saltwater settings, which makes it well-suited for uses that face moisture and severe conditions.
Formability: It is very formable, so it can be readily molded into a range of forms like sheets, plates, and intricate shapes while retaining its integrity.
High Fatigue Strength: Aluminum 5052 shows strong fatigue resistance, which makes it appropriate for uses involving repeated stress and strain, such as in vehicle production and aerospace.
Weldability: The alloy welds well, allowing it to be readily joined through various methods like MIG and TIG welding, without meaningful loss of the material’s properties.
Surface Finish: Aluminum 5052 can attain a smooth and visually appealing surface finish, fitting for uses where appearance is important, such as architectural applications and consumer products.
Aluminium 5052 Sheets and Plates play a critical role in petrochemicals, food processing, healthcare, water treatment, pharmaceuticals, power generation, construction, shipbuilding, and agriculture. Thanks to their corrosion resistance and durability, they provide reliable connections in pipelines, uphold hygiene standards, and endure challenging conditions.
Marine Applications: Because it resists corrosion from saltwater, Aluminum 5052 sees extensive use in marine settings like boat hulls and structures.
Automotive Industry: It serves in panels, fuel tanks, and additional parts where its low weight and resistance to corrosion offer benefits.
Architectural Applications: Thanks to its visual appeal and long-lasting nature, Aluminum 5052 finds use in architectural work for roofing, siding, and decorative elements.
Construction: It is applied in construction for roofing, cladding, and structural parts where its light weight and corrosion resistance prove advantageous.
Application Requirements: Identify the particular use case for which you require Aluminum 5052. Weigh aspects like resistance to corrosion, strength, ease of forming, and how well it can be welded. For instance, marine uses demand strong corrosion resistance, whereas structural uses might place greater importance on strength and formability.
Thickness and Dimensions: Pick the right thickness and dimensions for the sheets or plates according to what your project demands. Take into account the structural specifications and the manufacturing methods that will be used.
Surface Finish: Based on your visual or practical requirements, decide among various surface finishes like mill finish, brushed finish, or anodized finish. Every finish provides varying degrees of appearance and resistance to corrosion.
Email: sales@koasteel.nz
