Home > Inconel 718 Forging
Inconel 718 forgingsare prized for their outstanding strength, resistance to corrosion, and tolerance to heat, making them essential across aerospace, automotive, and oil and gas industries. Made up primarily of nickel, chromium, and niobium, these alloys perform exceptionally well in high-stress, high-temperature settings. Inconel 718’s capacity to preserve its structural integrity under extreme conditions guarantees dependable performance in critical applications where durability and performance are of the utmost importance.
| Specifications | ASTM B637, ASME SB637, AMS 5662 |
|---|---|
| Standard | DIN, ASTM, BS and all International Standards |
| Flat bar blocks | up to 27″ width and 15,000 lbs |
| Cylinders and sleeves | up to 50″ maximum O.D. and 65″ maximum length |
| Discs and hubs | up to 50″ diameter and 20,000 lbs |
| Rolled, hand forged or mandrel forged rings | up to 84″ maximum O.D. and 40″ maximum length |
| Rounds, shafts and step shafts | up to 144″ maximum length and 20,000 lbs |
| Forging Types | Impression Die Forging, Open Die Forging, Seamless Rolled Forging, Hot Forging, Cold Forging, Open die hammer forging, Impression die drop forging, Closed Die Forging, Press Forging, Upset Forging, Compression Forging, Swaging, Rotary Forging, Roll forging. |
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 718 | 0.08 max | 0.35 max | 0.35 max | 0.015 max | 0.30 max | – | 50.00 – 55.00 | 17.00 – 21.00 |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 718 | 8.2g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 482 | 45 % |
At Koasteel, we’re proud to be the largest supplier and manufacturer in the New Zealand, delivering advanced solutions for every one of your piping requirements. With cutting-edge production facilities strategically situated in the New Zealand, we maintain an extensive stock of more than 25,000 tons of top-quality materials ready and available.
Reach out to us for a fast quote tailored to your requirement.
We supply these Inconel 718 Forging in accordance with DIN, ISO, JIS or ANSI Standard.
Inconel 718 Forging uses are as varied as the industries they cater to, led mainly by the aerospace, railway, construction and automotive industries along with petrochemical, nuclear, medical, Oil & Gas, Chemical, Pharmaceutical, Food & Beverage, Nuclear, Thermal Power plants, Paper and Pulp, marine and mining, etc.
Yes, Inconel 718 forgings can be recycled. This alloy, made up mainly of nickel, chromium, and niobium, holds valuable metals that can be effectively recovered and put back into use across a range of industrial applications. Recycling Inconel 718 aids in conserving resources, cutting down waste, and lessening environmental impact. Following proper recycling procedures ensures these materials are successfully repurposed, promoting sustainable manufacturing and engineering practices while upholding high-performance standards in critical industries.
Mail: sales@koasteel.nz
