Home > Inconel 601 Forging
Inconel 601 forgings stand out for their outstanding resistance to oxidation and high-temperature conditions. Composed chiefly of nickel and chromium along with added aluminium, this alloy delivers robust mechanical strength and dependability in uses like furnace parts, heat-treating machinery, and more. The superb performance of Inconel 601 in degradation-prone conditions makes it well-suited for applications that demand rigidity and soft materials.
| Specifications | ASTM B564, ASME SB564, AMS 5715 |
|---|---|
| Standard | DIN, ASTM, BS and all International Standards |
| Flat bar blocks | up to 27″ width and 15,000 lbs |
| Cylinders and sleeves | up to 50″ maximum O.D. and 65″ maximum length |
| Discs and hubs | up to 50″ diameter and 20,000 lbs |
| Rolled, hand forged or mandrel forged rings | up to 84″ maximum O.D. and 40″ maximum length |
| Rounds, shafts and step shafts | up to 144″ maximum length and 20,000 lbs |
| Forging Types | Impression Die Forging, Open Die Forging, Seamless Rolled Forging, Hot Forging, Cold Forging, Open die hammer forging, Impression die drop forging, Closed Die Forging, Press Forging, Upset Forging, Compression Forging, Swaging, Rotary Forging, Roll forging. |
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 601 | 0.10 max | 1.0 max | 0.5 max | 0.015 max | 1.0 max | Balance | 58.0 – 63.0 | 21.0 – 25.0 |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 601 | 8.1 g/cm3 | 1411 °C (2571 °F) | Psi – 80,000 , MPa – 550 | Psi – 30,000 , MPa – 205 | 30 % |
At Koasteel, we take pride in being the largest supplier and manufacturer in the New Zealand, delivering innovative solutions for every piping requirement you have. With advanced production facilities strategically situated in the New Zealand, we hold an extensive stock of more than 25,000 tons of top-quality materials kept readily on hand.
Reach out to us for a fast quote tailored to your needs.
We supply these Inconel 601 Forging in accordance with DIN, ISO, JIS or ANSI Standard.
Inconel 601 Forging uses are as varied as the sectors they support, led mainly by the aerospace, railway, construction and automotive sectors along with petrochemical, nuclear, medical, Oil & Gas, Chemical, Pharmaceutical, Food & Beverage, Nuclear, Thermal Power plants, Paper and Pulp, marine and mining, etc.
Yes, Inconel 601 forgings can be recycled. These high-performance alloys, made up mainly of nickel, chromium, and iron, can be efficiently recovered and put back into use across a range of industrial applications. Recycling Inconel 601 helps preserve valuable resources, cut down on waste, and lessen environmental impact, promoting sustainable manufacturing and engineering practices. Correct recycling methods ensure that these materials are effectively reused, contributing to efficient resource management.
Email: sales@koasteel.nz
